AllMotion: Stepper Starter Kits Intelli-INCHSK
使你的电机在半小时内即可运行！
Intelli-Inch入门套件结合了一个INTELLI-Inch步进电机控制器+驱动器以及首次使用者所需的所有电缆，使其步进电机在不到半小时的时间内运行。 用户只需提供电源，步进电机和PC。
Intelli-INCH步进驱动器+控制器的尺寸仅为25.4mm X 25.4mm，旨在让用户无需编程即可创建微型运动控制解决方案。
有两种INTELLI-INCH型号。 “GO LEFT，GO RIGHT”模型和“JOYSTICK”模型。
GO LEFT，GO RIGHT MODEL：INTELLI-INCH-LR
该驱动器的输入为GO LEFT，GO RIGHT，LEFT LIMIT，RIGHT LIMIT AND POWER（9V-30V）和GROUND。 （不需要单独的5V电源。）输入接受5V TTL电平信号，或者可以接受开关接地。 请参阅接线图。
两个板载电位器设置MOVE电流和SPEED。 当不移动时，电流自动减小到移动电流的三分之一。 接地时的SLEEP_BAR输入可将电流消耗降至2mA以下，从而使驱动器可用于电池供电的应用。
主要特征
JOYSTICK型号：INTELLI-INCH-JY
该驱动器的输入为JOYSTICK IN，LEFT LIMIT，RIGHT LIMIT，POWER（9V-30V）和GROUND。 （不需要单独的5V电源）。 限制输入接受5V TTL电平信号，或接受开关闭合接地。 操纵杆是500欧姆至10K范围的线性锥形电位计。 请参阅接线图。
两个板载电位器设置MOVE电流和SPEED Speed Multiplier。 当不移动时，电流自动减小到移动电流的四分之一。 接地时的SLEEP_BAR输入可将电流消耗降至2mA以下，从而使驱动器可用于电池供电的应用。 On-board Speed Multiplier Pot设置操纵杆允许的速度范围。
Everything to get your Motor running within half an hour!
The Intelli-Inch Starter Kit combines one INTELLI-Inch Stepper Motor Controller + Driver and all cables required for the first time user to get their Stepper Motor moving in less than half an hour. The user needs to provide only a power supply, stepper motor, and a PC.
Measuring just 1" X 1” , the Intelli-INCH Stepper Driver + Controller was designed to allow users to create miniature motion control solutions with no programming.
There are two INTELLI-INCH MODELS. The "GO LEFT, GO RIGHT" MODEL and the "JOYSTICK" MODEL.
GO LEFT, GO RIGHT MODEL: INTELLI-INCH-LR
The inputs to this drive are GO LEFT, GO RIGHT, LEFT LIMIT, RIGHT LIMIT AND POWER (9V-30V) and GROUND. (There is no requirement for separate 5V power.) The inputs accept 5V TTL level signals, or can accept switch closures to ground. Please see the Wiring Diagram.
Two on board potentiometers set the MOVE current and the SPEED. Current is automatically reduced to one third of the move current when not moving. A SLEEP_BAR Input when grounded reduces the current draw to less than 2mA, allowing the drive to be used in battery powered applications.
Features
·4 Function input GO LEFT, GO RIGHT, LEFT LIMIT, RIGHT LIMIT
·1 Amp Chopper (PWM) Stepper Driver
·MilliOhm FETs allow board to run cool at 100% current
·Operates from 9V to 30V
·1" X 1" X 05" Thick
·1/16th microstep resolution for smooth motion
·Move current and speed settable with Potentiometers
·Auto reduction to 1/3rd move current in hold mode
·Fully ramped smooth accelerations and speeds
·Acceleration settable by fixed resistor
·Hold current automatically selected upon move completion
·Accepts TTL Level Inputs
JOYSTICK MODEL: INTELLI-INCH-JY
The inputs to this drive are JOYSTICK IN, LEFT LIMIT, RIGHT LIMIT, POWER (9V-30V) and GROUND. (There is no requirement for separate 5V power). The limit inputs accept 5V TTL level signals, or can accept switch closures to ground. The Joystick is a 500 Ohm to 10K range Linear Taper Potentiometer. Please see the Wiring Diagram.
Two on board potentiometers set the MOVE current and the SPEED Speed Multiplier. Current is automatically reduced to one quarter of the move current when not moving. A SLEEP_BAR Input when grounded reduces the current draw to less than 2mA, allowing the drive to be used in battery powered applications. The On-board Speed Multiplier Pot sets the range of speeds allowed by the Joystick.
资料下载
·Intelli-INCH 3D CAD Files
·Intelli-INCH on 3DContentCentral
·Intelli-INCH Wiring Diagram
·Intelli-INCH Datasheet
