智能步进电机驱动器(2 in one)
High Resolution Stepper Motor Driver Controller with Encoder
EZHR17EN MODEL #: EZHR17EN
EZStepper可为4轴以下设备快速提供步进电机驱动和控制、反馈的解决方案。
尺寸只有40mm×40mm,全智能步进电机控制器+驱动器设计被装在步进电机后端盖。一个单4线总线,包含2个电源线和两条通信线,在菊花链中连接多达16个这样的步进电机控制器。命令可以从任何串口终端程序发布(如超级终端)或从ezstepper Windows应用程序。
这些命令直观而简单。例如,命令万将步进电机的绝对位置10000。(这种通信协议与使用cavro DT或OEM协议兼容的设备)
EZ控制器还可以独立运行,不需要连接到PC。它可以设置为在开机时执行预设的指令串(即,在此模式下只需要电源) 命令包括嵌套循环和等待开关关闭时执行暂停,这在独立应用程序中很有用。
Ezhr17en的步进电机控制器通常可驱动控制法兰尺寸小于或等于60mm的2相步进电机。初次使用的用户可以使用入门套件,半小时内就可以学会驱动电机。
特征
附属驱动卡
第2轴附属卡

型号:EZDT17-BD
1安培双向电流模式驱动,勇于直流电机带反馈的控制,以及电磁线圈和电感负载
型号:EZDT17-ST-8
1安培1 /8步进电机驱动器,用于双极步进电动机
型号:EZDT17-ST-16
1安培1 /16步进电机驱动器,用于双极步进电机
型号::EZDT17-PW
双向 PWM电压型驱动,用于电阻加热器,直流电动机开环调速。
型号:EZDT17-LO
TTL电平逻辑输出可用于控制外部步进电机驱动器,或TTL,开/关和PWM输出额外的TTL电平输出。
EZStepper was designed to allow the rapid implementation of stepper motor solutions in products requiring automation.
Measuring only 1.6" x 1.6" (40mm x 40mm), the fully intelligent stepper motor Controller + Drivers are designed to be bolted onto the back of the stepper motors that they control. A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such stepper motor controllers in a daisy chain. Commands can be issued from any serial terminal program (such asHyperTerminal) or from the EZStepper Windows application.
The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to Absolute position10000. (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.)
The EZStepper is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications.
The EZHR17EN Stepper Motor Controller will work with any stepper motor that is 3" or smaller (size 23 or smaller). Our Starter Kits enable a first time user to make a Stepper Motor move intelligently in less than half an hour.
There are two versions for this Model # EZHR17EN. The difference between the newer version and the older version is:
1)The highlights. 2)Field upgradability of firmware.3)Position correction via encoder feedback.4)Negative numbers for position.
下载
EZHR17EN在打标机上的应用
资料下载